6 precautions for precision parts processing

Precision parts machining is a very careful machining process, and because of this, some precautions are necessary when carrying out this machining process.

Our Dongguan YIFENG METAL Technology specializes in cnc processing, hardware parts processing, precision parts processing, etc. There have been many years of technical precipitation. Processing products cover machinery, automation equipment, aviation, automobile, electronics, medical equipment, communication equipment and other fields. The industry spreads all over Guangzhou, Shenzhen, Dongguan, Pearl River Delta and other places. Let's follow them to see 6 precautions for precision parts processing.

1. Check whether the moving parts are filled with lubricating oil before mechanical work, then start and check whether the clutches and brakes are normal, and run the machine tool idly for 1-3 minutes. Operation is strictly prohibited when there is a mechanical failure;< /p>

2. Maintain a correct posture at work, and have sufficient energy to cope with the work. If you find that you are unwell, you should leave the job immediately and report to the leader. When operating, the mind must be concentrated, gossip is strictly prohibited, and mutual cooperation is prohibited. The operator should not operate in a state of irritability and fatigue, so as to avoid accidents and ensure safe operation. Before entering the workplace, all employees check whether their clothing conforms to the work requirements. Slippers, high-heeled shoes and clothing that affect safety are not allowed, and those with long hair must wear safety helmets;

3. Turn off the power first when changing the mold, and press the sports department After stopping the operation, you can start to install and debug the mold. After installation and adjustment, move the flywheel by hand to test for two times to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the blank holder is in a reasonable position;

4. You must wait for all other personnel to leave the mechanical work area and remove the sundries on the workbench before starting the power supply to start the machine;

5. When the machine is working, it is forbidden to put your hand into the working area of u200bu200bthe slider, and it is strictly forbidden to take and place the workpiece by hand. Standard tools must be used when picking and placing workpieces in the die. If you find that the machine has abnormal sound or the machine fails, you should immediately turn off the power switch for inspection. After the machine is started, only one person shall transport the materials and operate the machine. Others shall not press the electric building or step on the foot switch, let alone put their hands into the working area of u200bu200bthe machine or touch the moving parts of the machine with their hands;

6. When leaving get off work, the power supply should be turned off, and the finished products, leftovers and sundries should be sorted out on the post to ensure a clean and safe working environment.

The above are 6 precautions for precision parts processing, for reference only. Dongguan YIFENG METAL Technology can manufacture products that satisfy customers according to different requirements of customers. Welcome to place an order.