Basic Maintenance Method of CNC Machining Center

The application range of CNC machining center is very wide, and it is also a kind of equipment that is often used in the field of precision machining. The maintenance knowledge of CNC machining center is as follows:

1, When clamping the workpiece, it should be handled lightly to prevent bumps and damage to the work table; when the workpiece of the machining center is heavy, the bearing capacity of the machine table should also be verified, and the machining center is not allowed to run overloaded.

2, Before the operation of the machining center, wear all labor protection equipment, carry out lubrication and maintenance as required, and check the oil level of each lubricating oil.

3, The machining program should be checked first before it can be run. When using the high-speed function of the machining center, it is necessary to confirm the matching of the tools.

4, After the machine tool of the machining center is started, check whether the movement of the spindle and the worktable in all directions is normal, and whether there is abnormal noise.

5, In the process of processing, you should always pay attention to whether the movement and processing status of the machine tool are normal or not, and encounter abnormal phenomena. When there is noise or alarm, the machine should be stopped immediately for inspection and processing, and the machining center can continue processing after the fault is eliminated.