What Should Be Paid Attention to in the Processing of Precision Parts?

For this kind of mechanical processing, the process is very important. If there is a failure problem during the processing, it will definitely directly affect the final quality of the product, so we want to do a good job of the quality of the product. If it does, then it is necessary to ensure that the occurrence of failure problems is reduced during the operation. In this case, many things need us to pay attention to. Let ’s take a look at what we should pay attention to in the processing of precision parts .

1, Check whether the moving part is filled with lubricating oil before the machine works, then start and check whether the clutch and brake are normal, and run the machine idly for 1-3 minutes. It is strictly forbidden to operate when the machine is faulty.

2, Maintain the correct posture while working, and have sufficient energy to cope with the work. If you find that you are unwell, you should leave the job immediately and report it to the leader. During operation, you must concentrate on your thoughts, chatting is strictly prohibited, and mutual cooperation is not allowed. Operators must not operate in an irritable and tired state to avoid accidents and ensure safe operation. Before entering the work position, all employees check whether their clothing meets the work requirements. Slippers, high heels, and clothing that affect safety are not allowed. Those with long hair must wear hard hats.

3, Turn off the power first when changing the mold.  After the press motion department stops running, the mold can be installed and debugged.  After the installation and adjustment, move the flywheel by hand to test twice, check whether the upper and lower molds are symmetrical and reasonable, whether the screws are strong, and whether the blank holder is in a reasonable position. 

4, You must wait for all other personnel to leave the mechanical work area and remove the debris on the worktable before starting the power to start the machine. 

5, During mechanical work, it is forbidden to reach into the work area of  the slider, and it is strictly forbidden to take and place the workpiece by hand.  When picking and placing work pieces in the die, tools that meet the standards must be used.  If there is any abnormal sound from the machine or the machine is malfunctioning, turn off the power switch immediately to check.  After the machine is started, one person transports the material and operates the machine.  Others are not allowed to press on the electricity to build or step on the foot switch board, nor can they put their hands in the machine work area or touch the moving parts of the machine. 

6, When you are off work, you should turn off the idle power, and sort out the finished products, side materials and debris on the post to ensure that the working environment is clean and safe.