How to Reduce the Failure Rate of Single-Sided Milling Machine When Produce CNC Machine Parts

The CNC system programming, operation, and maintenance personnel equipped for CNC machine tools should understand the characteristics of the mechanical structure, CNC equipment, strong electrical equipment, hydraulic system, gas circuit and other parts of the equipment used, as well as the application environment and processing conditions of the rules. And strictly according to the requirements of the machine tool and CNC equipment operation manual correctly and reasonably use the machine tool, try to prevent the malfunction caused by improper operation. Many systems use a tape reader as the input device for the program, and tape information such as system parameters and CNC part processing programs must be input into the CNC system through the tape reader. 

Therefore, the surface of the reading head, the paper tape pressure plate, and the surface of the paper tape channel should be checked frequently, and the dirt should be removed in time. For the moving parts of the paper tape reader, clean the air filter regularly. When the air filter is installed on the CNC cabinet and the electrical cabinet door has a lot of dust, it will cause the cooling air in the cabinet to not flow smoothly. If this happens for a long time, it will cause the temperature in the cabinet to rise, making the system unable to work reliably. Therefore, it should be checked regularly according to the operating environment, and it should be removed and cleaned at least every six months.

There are still many points to pay attention to when using these single-sided milling machines. In order to reduce the incidence of failures in the use of single-sided milling machines, ordinary maintenance operations are indispensable. Doing their maintenance work well can reduce the failures of single-sided milling machines. Improve the efficiency of machine tool processing, so that the quality of the products we process can be guaranteed, so when we usually use single-sided milling machines, we should learn more about the use of common sense and maintenance knowledge in this area, and make good use of these single-sided milling machines.