CNC Machining Precision Parts Tolerance Control Guide

The process of CNC machining relies heavily on precision. However, no CNC machine exists with absolute precision. Variations arise due to material factors or processing techniques used. Therefore, at DONGGUAN YIFENG METAL, we assign specific part tolerances to all CNC machining processes during the design process. Machining tolerance is the allowable deviation from the dimensions of the part. It is also called dimensional accuracy. It has minimum and maximum size restrictions. Any part dimensions that fall within these limits meet the tolerance requirements.

This is a further understanding of CNC machining tolerances

Machining tolerance is the sum of specific dimensions that are allowed to differ from a given value. We express it in several ways, for example:

Below and above the allowable amount of a specific size. For example 0.14999 ±0.0001

itself allows for differences. For example ±0.0001

Lower and upper bounds. For example 0.1500, 0.1498

These defined areas of allowable tolerance range are called tolerance zones. A larger difference between the lower and upper limits results in a looser tolerance band. Smaller differences result in tighter tolerances.

Another way to express tolerance is to use decimal places in the numbering. The more decimal places, the tighter the tolerance value. The following are examples of decimal tolerance expressions:

One decimal place ±0.2”

Two decimal places ±0.01”

Three decimal places ±0.003”

Four decimal places ±0.0005”

The Importance of CNC Machining Tolerances

Most manufacturers refuse to start making parts until all features have well-defined tolerances. This is because this is the point of reference for understanding how a part interacts with other parts. The lack of information limits our understanding of the final design. Therefore, the chance of getting inaccuracy is higher.

For example, consider a shaft that fits the part design. The part has a hole of a specific diameter for the shaft to fit exactly in it. If the hole is smaller than the shaft size, it does not fit the shaft. Below are the possibilities with or without tolerance.

Provides a tolerance. We started this project right away. This is because we know the required size constraints. Therefore, it shortens lead times and minimizes costs.

No tolerance provided. At DONGGUAN YIFENG METALy, we decided to use standard tolerances. For example, for parts ± 0.01mm. Indicates that the diameter of the part will increase or decrease. If it reaches a tolerance below this limit, re-cnc machining is required. This only increases turnaround time and increases costs.



Factors Affecting CNC Machining Tolerance

Materials

Materials behave differently under stress. Also, some materials are easier to work with than others. Details of material properties should be considered when determining tolerances. These properties affect the processability of the material. Here are some material properties:

Thermal Stability: Non-metallic materials, such as plastics, warp when heated. This limits the range of machining processes to be used, as we have to account for heat. Taking this into account will keep the tolerance within an acceptable range.

Abrasive: Highly abrasive materials are difficult to machine. Examples of such materials include phenolic resins and glass laminates. They cause tool wear, which can lead to errors in machining.

Stiffness and Stiffness: Flexible and soft materials variably change size. This makes processing them more difficult. Examples of such materials include: foam, polyisocyanurate and polyurethane

Processing type

CNC machining methods significantly affect the possible tolerances of the finished part. Some procedures may be more precise than others.

Orbital Cutting: This process involves manually operating an orbital saw. Due to its manual nature, it requires a larger tolerance zone. This will get better accuracy.

Shear Cutting: This process involves applying a force large enough to cause the material to fail. We often use a set of blades or punches and dies. Therefore, it is not suitable for brittle or soft materials. Because they warp and break easily under enormous force. Therefore, it cannot hold tighter tolerances of less than ±0.015”.

CNC Screw Machining: This process uses a disc cam to feed the workpiece. There is less vibration and deflection of the part due to part movement rather than tool movement. This allows for higher achievable precision. We recommend it for processing materials such as phenolic, foam and plastic parts.

Steel Ruler Die Cutting: This process uses a custom die punch to create a specific shape. However, it is not suitable for brittle or soft materials.

Plating and Finishing

These two properties add a small amount of material to the surface of the part. This changes the dimensions of the final product and should be considered before design and production.

Cost

We recommend achieving precise tolerances. However, it will cost more to obtain tighter tolerances than required. If working on a tolerance of three decimal places, do not exceed four decimal places. Contact DONGGUAN YIFENG METAL today to get your CNC machining quote.
Dongguan Yifeng Metal Co., Ltd.'s has been able to achieve excellent performance in an extremely competitive industry.
Dongguan Yifeng Metal Co., Ltd. is a reliable company that offers wonderful . In addition, the company also provides related components to make it more efficient. To know more, go to Dongguan Yifeng Metal Co., Ltd..
But loyalty programs aren't just a boon for customers – Yifeng Metal gets access to tons of valuable data for opt-in marketing campaigns.
The above are only part of the examples regarding custom metal parts, for more information, please click here Dongguan Yifeng Metal Co., Ltd..