Six steps of CNC machining you don't know

When it comes to cnc processing, there must be reasonable processing methods and processing steps, because these processes directly affect the processing quality, production efficiency and processing costs of cnc-machined parts. Therefore, we have to do the following six steps reasonably about CNC machining:

Step 1: Rough first and then fine

For example, According to the order of rough turning-semi-finishing-finishing turning, the machining accuracy is gradually improved. Rough turning will remove most of the machining allowance on the surface of the workpiece (indicated in the stippled line shown in Figure 2-4) in a relatively short period of time. In this way, on the one hand, the metal removal rate is improved, and on the other hand, it satisfies the requirement of allowance uniformity for finishing. If the uniformity of the allowance left after rough turning cannot meet the requirements of finishing, semi-finishing should be arranged to prepare for finishing. To ensure the machining accuracy in the finishing process, the outline of the part should be cut out according to the size of the drawing; , The modern part away from the tool setting point is processed first, and the part away from the tool setting point element is processed later, so as to shorten the tool moving distance and reduce the idle travel time. For turning, it is beneficial to maintain the rigidity of the blank or semi-finished product and improve the cutting conditions; >

For parts that need to be machined both the inner surface (inner cavity) and the outer surface, when arranging the machining sequence, the inner and outer surfaces should be roughed first, and then the inner and outer surfaces should be finished. Do not machine other surfaces (inner or outer) after machining part of the upper surface (outer or inner) of the part.

Step 4: The base surface first principle

The surface used as the fine reference should be processed first. This is because the more precise the surface of the positioning datum, the smaller the clamping error. For example, when machining shaft parts, the center hole is usually machined first, and then the outer surface and the end surface are machined with the center hole as the fine reference;

Step 5: first master The latter principle

The main working surface and assembly base surface of the part should be processed first, so as to find out the possible defects on the main surface of the blank as soon as possible. The secondary surface can be interspersed, and it is placed after the main surface is processed to a certain extent and before the final finishing; /p>

The size of the plane outline of the box and bracket parts is relatively large. Generally, the plane is processed first, and then the holes and other dimensions are processed. In this way, the machining sequence is arranged, on the one hand, the machined plane is used for positioning, which is stable and reliable; partial.

Collect and pay attention to the above CNC processing steps, so as to improve the quality of CNC processing, improve production efficiency and reduce processing costs.

At a time when technology is essential for custom metal parts, ensuring that it works in a symbiotic way with your human employees is key.
Dongguan Yifeng Metal Co., Ltd. is a rapidly growing Manufacturing Company based in China. We offer a wide range of equipment that helps in custom metal works which are safe, durable and economical. We provide custom metal parts, sheet metal manufacturing, custom metal works,etc. more about and custom metal parts solutions are covered in Dongguan Yifeng Metal Co., Ltd.. Take a visit!
Dongguan Yifeng Metal Co., Ltd. prepares for every aspect of running a business, and this includes developing a sound understanding and ability to manage the financial aspects of our company, including financial analysis, taxes and budgeting.