Matters needing attention in CNC precision machining

What should be paid attention to in CNC precision machining

What are the tasks that should be paid attention to in CNC precision machining? Wofu will give you a brief introduction below.

1. Before each program is processed, it is necessary to strictly determine whether the applied tool is similar to the program.

2. When installing the tool, it is necessary to determine whether the length of the tool and the clamping tool head used are suitable.

3. It is strictly forbidden to open the door during the operation of the machine tool to prevent flying tools or flying workpieces.

4. During the CNC precision machining process, if the operator notices the tool collision environment, the operator needs to stop immediately, such as pressing the 'emergency stop' button or 'reset key' button or setting the 'feed rate' to zero Wait. CNC precision machining factory

5. CNC precision machining needs to be kept in the similar area during each tool setting in the similar workpiece to ensure the accuracy of the tool when the tool is connected. CNC precision machining Middle Manipulation Rules.

6. If the machining allowance is found to be excessive during the machining process, you need to use 'single segment' or 'stop' to clear the X, Y, Z values, then manually mill them out and then shake Go back to 'zero' and let it self-cross.

7. The operator cannot leave the machine tool or regularly interrogate the machine tool operating environment during the self-handover operation. If it is necessary to leave the machine halfway, it is necessary to designate relevant personnel to check it.

8. The aluminum slag in the machine should be removed and cleaned before oil injection with the light knife to prevent the aluminum slag from absorbing oil.

9.CNC precision machining should use air blowing as much as possible in the roughing program, and spray oil in the smooth knife program.

10. The workpiece must be rinsed and deburred immediately after the workpiece is off the machine.

11. During the break, the operator needs to make timely and accurate explanations to ensure that the subsequent processing can be carried out normally.

12. Before shutting down, make sure that the tool magazine is at the initial position, the XYZ axis is stopped at the center position, and the power supply and the main power supply on the machine control panel are turned off one by one.

13. When encountering thunderstorms, you need to disconnect the power immediately and stop working.

is emerging as one of the most popular custom metal parts, moving beyond its sheet metal manufacturing benefits, with conclusive scientific evidence suggesting the positive role play in custom metal works.
Dongguan Yifeng Metal Co., Ltd. will deliver superior returns to our shareholders by tirelessly pursuing new growth opportunities while continually improving our profitability, a socially responsible, ethical company that is watched and emulated as a model of success.
The rising sheet metal manufacturing consciousness observed worldwide are expected to be key factors driving the demand for custom metal works custom metal parts.