Brass parts are usually processed by bar material. If the customer is more demanding on the price, it is also possible to process it with pipe material according to the customer's product. However, the tube material is not suitable for all products. In the case of customers' demanding prices, the brass products that YIFENG often produces usually use automatic lathes and CNC machining, which is also based on the difficulty of the product. Automatic lathes usually produce nuts, bushes, washers, etc., while CNC numerical control produces many kinds of brass fittings, with fast production cycles and high efficiency.
- Competitive prices and short lead time.
- Product design, manufacturing and technical support.
- Anodizing, Electroplating, Black Oxide, Abrasive Blasting, Polishing, Passivating, Brushing, Powder Coating, Painting, Surface Grinding, Laser Marking, etc.
Wall Thickness
- The minimum wall thickness should be at least 1 mm for machined parts. - 2 mm is suggested for better strength and 2.5 mm for a rigid wall.
Pocket Depth
- Pocket depth should be up to 3 times the diameter of the end mill
Engraving
- Engraving is preferable to embossing - For the clear, legible text consider fonts such as Arial or Gothic - Design letter strands with a width of at least 2 mm
Internal Radii
- The minimum internal radii possible is 1 mm - In general, internal radii dimensions depend on the depth of pocket being milled
Holes
- Use standard drill bit sizes - Minimum of 1 mm in diameter
Threads
- Use standard metric inserts - Smallest threaded insert possible is M2