This product is produced by CNC lathe technology, first turning, then drilling, and finally processing and tapping, which is an approximate production process. Material Black POM is very common, one of the most commonly used materials for making plastic products, as well as nylon, ABS, etc. This product is used for product assembly and will have its own use as a semi-finished product. The advantage of the material POM is that it is better than the material nylon, because the material POM is not as hard as nylon, and it will not cause loss to the machine. The material nylon is often more expensive than the material POM, which will cause some loss to the machine, but its hardness is high. Not easy to damage, so each material has different advantages and disadvantages. Generally, plastic products have a short production cycle and are easier to process than metal materials. If they are simple plastic parts, they will be made by automatic lathes, such as bushings, gaskets, nuts, etc. Complex products are made by CNC lathes. There are many processes and must be Made by CNC lathes. Plastic parts are the second most important production parts in addition to metal parts in the company. The product performance is good, the price is relatively competitive, and the quality is also an important factor that determines that customers often place orders for our factory.
- Best custom cnc machining service.
- All parts are produced in accordance with international regulations and ISO certification.
- Product design manufacturing and technical support.
- Anodizing, Electroplating, Black Oxide, Abrasive Blasting, Polishing, Passivating, Brushing, Powder Coating, Painting, Surface Grinding, Laser Marking, etc.
Wall Thickness
- The minimum wall thickness should be at least 1 mm for machined parts. - 2 mm is suggested for better strength and 2.5 mm for a rigid wall.
Pocket Depth
- Pocket depth should be up to 3 times the diameter of the end mill
Engraving
- Engraving is preferable to embossing - For the clear, legible text consider fonts such as Arial or Gothic - Design letter strands with a width of at least 2 mm
Internal Radii
- The minimum internal radii possible is 1 mm - In general, internal radii dimensions depend on the depth of pocket being milled
Holes
- Use standard drill bit sizes - Minimum of 1 mm in diameter
Threads
- Use standard metric inserts - Smallest threaded insert possible is M2